Equal pressure with every injection for consistent and accurate results. It is used to melt TCS thermoplastic material and inject it into the flask. The furnace is built into the injector eliminating the need to move the hot cylinder and molten resin from the furnace to the injector.
One of the many benefits of this injector includes a design that is intended for easy cleaning and maintenance of the unit, because it is inevitable that some thermoplastic residue will be released into the receptacle at some point throughout the use of the injector.
It has 4 screws located on the plaque at the top of the machine, the screws are simply unscrewed to remove the cylinder, then the cylinder can be easily cleaned of residue. Additionally, this unit has a self purging system, eliminating the need for hammering out cylinders.
Requires a minimum of 140psi (compressor not included).
Use with 25mm diameter cartridges.
Yield: Approx. 30 cases per day
Weight: 40lb (18 kilos)
Dimensions: W 8"(20.32cm) x H 23" (58.42cm) x D 13.5" (34.29cm)
• Inject with a touch of a button
• Built-in furnace
• Self-purging system
• Easy clean up and maintenance of unit
• Compact table top design
• Made in the USA
• 1 year warranty
Item # 3525-01 (injector unit only 110V)
Item # 3525-02 (injector unit only 220V)